- #1146 [wahmaylok], 21-12-31 13:38請問xp12係咪唔使關機?因為前面冇開關掣,所以唔知點樣䦕關
- #1145 [wahmaylok], 21-10-12 10:33唔該晒
- #1144 [blackspin], 21-10-11 22:56#1143
At low to mid volume, the pointer should be stay at the left side, may slightly move towards the right hand side occasionally, unless your speaker is very hard to drive or you always listen in very high volume, the point should seldom move close to the center position -
- #1143 [wahmaylok], 21-10-11 21:34大家好,身手一問,我用緊x350.5 請問中間個錶支針去到咩位先叫正常.唔該
- #1142 [ET], 21-05-09 22:24咁奇?我兩套的確冇支啱。
- #1141 [hahayanyan], 21-05-08 23:55Metric and IMPERIAL unit sizes of Hex Keyyyyyyyyyy
最後修改時間: 2021-05-08 23:58:11 - #1140 [blackspin], 21-05-08 23:23The XP top plate Hex screw is in standard size, you should get the appropriate Hex Key pack to open it very easily. I have opened my XP-20 once to see what's inside long time ago.
- #1139 [ET], 21-05-08 22:59想請教下xa,xp機殼啲六角螺絲係乜size? 搵左幾套六角匙都冇支啱,只可用支一字批好免強開到。
- #1138 [ckfan], 21-05-04 10:05Thanks羅師兄
- #1137 [羅密歐], 21-05-04 09:55取不出來從,spade only。
- #1136 [ckfan], 21-05-04 08:24Thanks ET師兄.請問有冇師兄知道怎樣取出膠粒
最後修改時間: 2021-05-04 08:27:41 - #1135 [ET], 21-05-03 22:14接線柱中間膠塞好似可以拿走來接蕉插。
- #1134 [ckfan], 21-05-02 11:55Thanks Black師兄
- #1133 [blackspin], 21-05-02 10:57350.5 cannot use banana plug, spade only.
- #1132 [ckfan], 21-05-02 07:56請問師兄350,5後級可不可以用蕉插
- #1131 [aglc], 21-04-08 14:50.8個樣斯文左但係把聲真係好好!
- #1130 [老夫子], 21-04-01 18:26.5同.8有好大分別,錶板唔同,連按鍵都轉了,後面的接缐柱更是不同。
- #1129 [aglc], 21-04-01 11:25如 #1126 所講 "背後啲插线位置不同",layout都改埋,唔多似係機主自己改喎。
- #1128 [chhnpng], 21-03-05 13:42.8 binding post 用古河,会唔会係.5机主自己改?
- #1127 [aglc], 21-03-05 12:26好似真係有兩個version咁喎,我估binding post同點8一樣果款新D。
- 下一頁 (2 of 57)
- 返回 ...