- #16 [happyquad], 09-03-25 10:22Please Check PM Thanks!
- #15 [254mm], 09-03-25 08:48只知其然, 不明其理, 學唔到野架
- #14 [254mm], 09-03-25 08:24咁樣學野, 點學得曉
-
- #13 [epic], 09-03-24 18:16籃色唔要，將條黑色跟 geroge1977 條白色一樣接就 OK 了！
- #12 [alphability], 09-03-24 18:15因為我那個是 加拿大版
http://quad405.com/
呢到報稱
The Canadian version of the amps did not come with a variable input voltage selector. They came fixed at 10 volts and had a more robust wiring and also an extra set of fuses. Click on the picture to the left to see the Canadian version of the power supply and how to wire it.
- #11 [254mm], 09-03-24 18:14don't ask. just follow george 1977 's gear, that will do!!
- #10 [254mm], 09-03-24 18:110--110, 0--7Volts
110--0, 7--0Volts
你的火牛排線, 睇得明就做, 睇不明就停啦
有實物圖, 照做啦, 仲問?? - #9 [alphability], 09-03-24 18:08哦, 多謝勸告
不過我唔聽, 問問 quad 看看佢地回唔回應先 :p - #8 [254mm], 09-03-24 18:03你唔識, 唔好學人攪啦, 盞整壞架機
- #7 [alphability], 09-03-24 17:53要改為 220 Volts, 則串連兩組 110 volts 線圈,
第一組尾駁第二組頭, ie, 頭尾, 頭尾 則為 220 Volts,
另第一組頭並第二組頭, 尾則並第二組尾, 則為 110v
即係我個部 黑色那條啦 - #6 [alphability], 09-03-24 17:51254mm兄, 感謝回應!
我個部 110 Volts , 並聯兩組同相位 110 volts 線圈
即圖
應該是藍色那條
- #5 [alphability], 09-03-24 17:45我個部
- #4 [alphability], 09-03-24 17:40人地 geroge1977 兄 部機
- #3 [254mm], 09-03-24 16:45學野要記原理, 就一理通, 百理明, 活學活用, 再跟線路, 應改到,
- #2 [254mm], 09-03-24 16:42原理是 110 Volts , 並聯兩組同相位 110 volts 線圈
要改為 220 Volts, 則串連兩組 110 volts 線圈, 第一組尾駁第二組頭, ie, 頭尾, 頭尾 則為 220 Volts,
另第一組頭並第二組頭, 尾則並第二組尾, 則為 110 Volts - #1 [alphability], 09-03-24 16:28我部最後一批 QUAD 405.2 原本 117V 美州電
請問各大佬, 點改去 香港電壓
記憶只需飛兩條線
感謝任何意見 - 返回 ...
回覆(1): 我部QUAD 405.2 要改