- #17 [Kenny], 12-08-17 16:29
- #16 [simonix], 12-08-17 16:08去新填地街德昌棧買6mm紅銅枝,$58有八尺長可開一百粒
- #15 [s6410], 12-08-17 15:17Change the wall plate to 15A MK socket plate!
Use 15A plug from MK as well.
Safe and soundwise much better than using low grade copper rod as fuse in 13A plug! -
- #14 [hahayanyan], 12-08-17 15:13does..home insurance..(when bad thing happened) cover the UK 15A round Pin plug and socket?
if it is not a concern, why not just using those 15A Round PIN from MK UK ? Surely it is better than those 13A now... - #13 [apprentice], 12-08-17 12:46I use 13A bussman ceramic fuse bought at Apliu Street years ago at around $2 each. Sounds ok.
- #12 [Wildcat], 12-08-17 12:22小徐兄,
請問如何加工?
謝謝 - #11 [香港小徐], 12-08-17 12:09我都問過銅鋪,一問就知玩換Fuse,佢話冇這直徑的,自己想辦法吧,我最後都加工做左,效果很好。
- #10 [elvisandbilly], 12-08-17 12:05再唔係買個圓腳插頭
攞隻圓腳當fuse用
===================
Very smart idea! - #9 [chan@review33], 12-08-17 11:59再唔係買個圓腳插頭
攞隻圓腳當fuse用 - #8 [chan@review33], 12-08-17 11:56旺角新填地街賣銅鋪
銅支段呎買
自己cut短 - #7 [elvisandbilly], 12-08-17 11:55I suspect that the flimsy, skinny fuse is the limiting factor in a UK plug.
- #6 [elvisandbilly], 12-08-17 11:54But where to buy the copper rods? Hardware stores?
- #5 [cmwk], 12-08-17 11:48DIY
buy copper rod and cut suitable length (fuse length)
polish and replace the fuse!! done - #4 [simonix], 12-08-17 10:36.
最後修改時間: 2012-08-17 10:43:37 - #3 [olddude], 12-08-17 09:40I used to get them at Tai Lee in Central.
- #2 [newnew1], 12-08-17 09:00Use MK 15A socket and plug
- #1 [elvisandbilly], 12-08-16 17:11以前聽哩度D師兄講過話UK插頭裡面果條FUSE可以用銅BAR來代替,如安全問題唔計,請問哩條BAR可以喺邊道買到呢? 唔該!
- 返回 ...
If I remember correctly, copper sounds "noisy". Bussman sounds "normal" but "boring". Russ Andrews improves the system a lot as it makes everything very quiet and "dark" and improves the sound stage quite a bit. Hifi Tuning is a step up from Russ Andrews but the improvement is not as dramatic as Russ Andrews over Bussman/MK fuse. Incredible - but you can actually hear a difference from fuse change.