- #1 [elvisandbilly], 12-08-16 17:11以前聽哩度D師兄講過話UK插頭裡面果條FUSE可以用銅BAR來代替,如安全問題唔計,請問哩條BAR可以喺邊道買到呢? 唔該!
- #2 [newnew1], 12-08-17 09:00Use MK 15A socket and plug
- #3 [olddude], 12-08-17 09:40I used to get them at Tai Lee in Central.
-
- #4 [simonix], 12-08-17 10:36.
最後修改時間: 2012-08-17 10:43:37 - #5 [cmwk], 12-08-17 11:48DIY
buy copper rod and cut suitable length (fuse length)
polish and replace the fuse!! done - #6 [elvisandbilly], 12-08-17 11:54But where to buy the copper rods? Hardware stores?
- #7 [elvisandbilly], 12-08-17 11:55I suspect that the flimsy, skinny fuse is the limiting factor in a UK plug.
- #8 [chan@review33], 12-08-17 11:56旺角新填地街賣銅鋪
銅支段呎買
自己cut短 - #9 [chan@review33], 12-08-17 11:59再唔係買個圓腳插頭
攞隻圓腳當fuse用 - #10 [elvisandbilly], 12-08-17 12:05再唔係買個圓腳插頭
攞隻圓腳當fuse用
===================
Very smart idea! - #11 [香港小徐], 12-08-17 12:09我都問過銅鋪,一問就知玩換Fuse,佢話冇這直徑的,自己想辦法吧,我最後都加工做左,效果很好。
- #12 [Wildcat], 12-08-17 12:22小徐兄,
請問如何加工?
謝謝 - #13 [apprentice], 12-08-17 12:46I use 13A bussman ceramic fuse bought at Apliu Street years ago at around $2 each. Sounds ok.
- #14 [hahayanyan], 12-08-17 15:13does..home insurance..(when bad thing happened) cover the UK 15A round Pin plug and socket?
if it is not a concern, why not just using those 15A Round PIN from MK UK ? Surely it is better than those 13A now... - #15 [s6410], 12-08-17 15:17Change the wall plate to 15A MK socket plate!
Use 15A plug from MK as well.
Safe and soundwise much better than using low grade copper rod as fuse in 13A plug! - #16 [simonix], 12-08-17 16:08去新填地街德昌棧買6mm紅銅枝,$58有八尺長可開一百粒
- #17 [Kenny], 12-08-17 16:29Among copper bar, Bussman fuse, MK fuse, Russ Andrews 13A fuse, Hifi Tuning fuse, Hifi tuning fuse sounds the best.
If I remember correctly, copper sounds "noisy". Bussman sounds "normal" but "boring". Russ Andrews improves the system a lot as it makes everything very quiet and "dark" and improves the sound stage quite a bit. Hifi Tuning is a step up from Russ Andrews but the improvement is not as dramatic as Russ Andrews over Bussman/MK fuse. Incredible - but you can actually hear a difference from fuse change. - #18 [elvisandbilly], 12-08-17 22:44I guess what we should use depends on what we wish to achieve??
Now, I am only guessing :-
Copper bar is good for subwoofers and high current amplifiers as it facilitates better flow of electricity
HiFi tuning fuse is better for CD players and Pre-amplifiers as it delivers electricity in a more delicate way. - #19 [LB1i], 12-08-17 23:55見過有人用銅線代fuse,上錫方法。
- #20 [Kenny], 12-08-18 00:26Contrary to what you are guessing, 13A fuses are mostly for power amp, subwoofer, but not for pre-amp nor CD player as these low power devices can be plugged into a power plant with US mains cables (no fuses). For power amp, subwoofer, they are required to plug into the wall directly with UK plugs that have 13A fuses.
Copper bar would not increase current flow - at least I cannot hear it - but with a nice Bussmann fuse (generally recognized as the best sounding ceramic fuse), you can hear the sound with more quiet background, clearer image, and less edgy feeling. Bussmann fuse can be purchased from RS Online @ $2.21 per piece. You can buy a copper bar @ about $10 (long time ago when I got it), a Russ Andrews at about $30. Easy to try and hear the difference. - 下一頁 (1 of 2)
- 返回 ...