- #37 [bcagl], 18-04-22 20:04No need to use copper bar, just use two plugs method.
- #36 [bcagl], 18-04-22 19:51No need to use copper bar, just use two plugs method.
最後修改時間: 2018-04-22 20:08:46 - #35 [孟波], 18-04-22 11:50又中!
-
- #34 [aheung], 18-04-22 11:44用銅bar 代替 fuse?
為何唔直接用美頭? - #33 [bd727049], 14-07-06 20:02推荐:KDF Fuse
- #32 [odysseyhk], 14-02-22 14:59also tried "Pure 銀線,銲上fuse", made by experienced professional. Not good after A/B comparison. If not A/B comparison, it sounded pretty good. Once A/B comparison, the one with "Pure 銀線,銲上fuse" is not natural at all. Given up.
Well, some ching may have positive experience with it. So that that means is that the outcome of this method is more case by case. Need to trial and error indeed. - #31 [odysseyhk], 14-02-22 14:54Tried copper bar many years ago. Not good at all. I found some good "made in England" MK fuse in Ap Liu Street which a reasonable good at HK$1 each. Very good choice for budget audiophiles.
Using Hifi Tuning Fuse now and the result is very good. If budget is not an issue, it is a very good choice. - #30 [ET], 14-02-21 00:29試過用銅條代左條fuse, 覺得把聲厚左小小但粗大左. 煲左兩個幾月都差唔多. 依家換返英國造MK就平衡翻. 意見唔需太費神係依方面.
- #29 [bd727049], 14-02-20 20:25
- #28 [gigishing], 12-08-19 20:33謝謝 chan師兄回覆!
- #27 [chan@review33], 12-08-19 14:31冇
人地原本設計係要有fuse - #26 [gigishing], 12-08-19 11:49小弟想問師兄們有無13a插頭是沒有fuse (直過)的.謝謝.
- #25 [254mm], 12-08-18 21:51買兩個插頭,
用兩條N腳裝落同—個頭又得
不過 D 膠或會遮住個入銅線位, 要做小小 Diy - #24 [chan@review33], 12-08-18 19:02買兩個插頭,
用兩條N腳裝落同—個頭又得 - #23 [yeeba], 12-08-18 18:12有Ching要啦..
- #22 [yeeba], 12-08-18 16:55上次整條銅棍試過.D聲一樣無變,後來換用美式插,干手淨腳,師兄想試銅棍就送比你..
- #21 [SonusMaster], 12-08-18 00:34用銅線代fuse,上錫方法x2
我用鍍銀線,銲上fuse上面,效果一流,尤其details! - #20 [Kenny], 12-08-18 00:26Contrary to what you are guessing, 13A fuses are mostly for power amp, subwoofer, but not for pre-amp nor CD player as these low power devices can be plugged into a power plant with US mains cables (no fuses). For power amp, subwoofer, they are required to plug into the wall directly with UK plugs that have 13A fuses.
Copper bar would not increase current flow - at least I cannot hear it - but with a nice Bussmann fuse (generally recognized as the best sounding ceramic fuse), you can hear the sound with more quiet background, clearer image, and less edgy feeling. Bussmann fuse can be purchased from RS Online @ $2.21 per piece. You can buy a copper bar @ about $10 (long time ago when I got it), a Russ Andrews at about $30. Easy to try and hear the difference. - #19 [LB1i], 12-08-17 23:55見過有人用銅線代fuse,上錫方法。
- #18 [elvisandbilly], 12-08-17 22:44I guess what we should use depends on what we wish to achieve??
Now, I am only guessing :-
Copper bar is good for subwoofers and high current amplifiers as it facilitates better flow of electricity
HiFi tuning fuse is better for CD players and Pre-amplifiers as it delivers electricity in a more delicate way. - 下一頁 (1 of 2)
- 返回 ...