- #1658 [tonyhkg], 08-06-08 21:25
- #1657 [DD], 08-06-08 21:21係個搖控不停射signal比amp 定 amp既問題黎?
會唔會係個搖控個key入面接觸左分離唔到? - #1656 [tonyhkg], 08-06-08 20:39I knew this big BUG ever since I owned my very first JRDG product (CAPRI)
however,when I search thru internet about the issue....
seems many users (around the world) have reported to JRDG but it is yet still not get fixed !
this problem is especially easy to find in the lastest pre-amp, int amp products...
so you guys ...be careful !!
.. -
- #1655 [Gundam-man], 08-06-08 19:51So, as suggested by tonyhkg, I find you guy better to another learnt remote to replace the original one.
- #1654 [Gundam-man], 08-06-08 19:49I once use the remote to up the volume but it lose control but the volume keep rising. Not unit I turn it down in the main switch of my concerto-pre it won't stop. Finally one of my bass unit is gone.
I report the case to agency and they give a check to my concerto-pre and 501, but nothing could be found out. But the agency do pay the bill for my repair fee of my destroyed bass unit. - #1653 [tonyhkg], 08-06-08 17:54kwok123
trust me.....but don't trust the remote or battery from JRDG !!!
========
dear JRDG users with remote problems...I suggest you get a universal remote to replace the original JRDG remote for functions
if it is jammed with other equipment then
I suggest you make a small BLACK Card and cover
the LED display unit (whole area) of JRDG unit
then when you point to your TV (for example if it is jammed with JRDG unit) then your JRDG unti will not get affected...this is the method I used now...........So far so good !
... - #1652 [hifi33], 08-06-08 17:28Hi Tony Hing,
I have used philip pronto already. However, the JRDG remote signal got jammed with the signal of Poineer plasma. the agent has double checked but they can;t do anything.
Hi gundam man, Please elaborate your experience so we understand what is the reason behind.
thanks - #1651 [kwok123], 08-06-08 13:28my original battery is Duracell Procell - professional Alkaline battery.
Looks like a good battery bor? - #1650 [Gundam-man], 08-06-08 13:16I have a similar experience before and as a result, one of the bass unit of my speaker is GONE!!!
FXXK!!! - #1649 [tonyhkg], 08-06-08 12:33mr paul and hifi33
if you have read thru all the posts here
you will know that alth JRDG's products are very good but ....
the most untrustworthy one of their product is...
the REMOTE CONTROL UNIT !!!
at day one, you should either throw away the original battery inside the remote control or same as me...
throw away the remote control !! =.="
another way is to get some learn remote and transfer all function buttons of the JRDG remote to the learn remote...and then you can sit back and relex to enjoy your JRDG and also...
protect your speakers !
cheers - #1648 [hifi33], 08-06-08 10:17Mr Paul,
Are you using the Poineer Plasma? Did you turn on other video equipments when you increase your pre amp or amp volume?
Becareful, I got a painful experience with jeff's remote. When I increase the volume of my poineer plasma , the pre amp volume also increase to maximum at the same time. Obviously, my 10 days speaker gone.
The agent checked my preamp and find the same problem when they tested my equipment.
Anyway, always mute your preamp.
Paul, I suggest that you should pass the remote to agent to check it.
good luck - #1647 [mr.paul], 08-06-08 07:12my remote control went "sort sort dei" a few days ago! when i pressed the volume down button once, it went all the way to zero volume. then when i pressed the volume up once, it went all the way to maximum volume!! fortunately, i pressed the mute button immediately or else my speakers would have been burned. the remote control went back to normal subsequently. i have changed the original battery since day one, and yet still..........
- #1646 [scm70asl], 08-06-05 14:21
Thank you all for sharing your expereince.
I'm placing the amp at the bottom level of my hifi rack, so it give the amp 4-5inch open space for air circulation. Now the temperature of the unit is much lower.
I need another help from JR brothers - I was trying to use a balance-rca connector, but, found the output became much smaller. I didn't have the same problem when connecting it with rca input. Is there any setting to adjust the balance input jack ? Or is it a problem on my connector with the phase reverted ?
Thanks for your help in advance.
Alex
- #1645 [mr.paul], 08-05-29 09:50scm70asl hing, i do not have Continuum 500 but can share my experience with Concerto integrated, another ice powered amp. the unit is in general quite cool, but after i bought and plugged in my PC-1, the unit becomes noticeably warmer. the temperature, though being warmer with PC-1, is still a lot cooler than the JF Concentra i owned many years back, a non-ice powered amp. your Continuum 500 has built in parts similar to PC-1, so i presume the temperature is similar to my Concerto + PC-1. as mentioned by other brothers here, you can request the technician to check for you if you suspect something is wrong, say the amp is so hot that you cannot even stick your hands onto it for more than 10 seconds.....
- #1644 [trek9.8], 08-05-29 00:06U better ask FIM, I asked not like other member said.
I think only professional is FIM technicain
If U purchase is HONG goods, also suspect it's not in normal working U can request them to check for U - #1643 [StephenChow01], 08-05-28 17:48Hello scm70asl hing,
Welcome to JRDG world in HK.
All the amps, no matter it is JRDG amps or not, should also have enough room for air circulation. But for Continuum, the temp. should not be so high compared with other A or A/B class amps. - #1642 [scm70asl], 08-05-28 17:09I'm using the Continuum 500, the unit will get pretty warm if there isn't enough room for air circulation. Anyone share your experience ?
- #1641 [hifi33], 08-05-23 17:01good sharing of experience.
- #1640 [DD], 08-05-23 15:34poweramp也長開的
- #1639 [StephenChow], 08-05-23 14:51hifi33 hing,
Yes. Just mute it when you are not in used. - 下一頁 (41.5 of 124)
- 返回 ...
or the pre-amp/int amp unit
there is a jumper setting to change the
response time of to receive remote command for function
but I guess this is not a good solution !