- #1246 [odysseyhk], 16-03-27 17:34
- #1245 [ptcm], 16-03-27 16:17Quick question on DSDse DAC,
I inadvertently fixed the volume on two coaxial connections. How could I unfix it, so that I could adjust volume again ?
Thanks in advance. - #1244 [odysseyhk], 16-01-17 11:47Yes , on dac2, terminate all unused digital ports.
On pc terminate all unused USB port . It is a small usb noise remover design as a terminator. -
- #1243 [falcongate], 16-01-17 01:49>#1242
Are those for unused digital input ports? - #1242 [odysseyhk], 16-01-17 01:43夜半調聲,Terminator 滅絕毛燥感
Showroom 夜半是最好的調聲時間,非常靜,電源清潔,大聲也不怕打擾他人。
用了三種Terminators :
XLR digital input Terminators (brought from eBay)
RCA digital input Terminators (brought from eBay)
USB output Terminators (自行制作)
全部都有不錯的表現,小投資,大改善.
最後修改時間: 2016-01-17 01:46:57 - #1241 [batmanamesIA], 15-12-29 02:27
- #1240 [batmanamesIA], 15-12-01 07:27
- #1239 [ptcm], 15-11-15 18:45I am looking for a transporter to work with W4SDSDse best if I2S connection available. Just wondering any brother using it that are under $15k ?
thanks. - #1238 [odysseyhk], 15-11-09 01:39I have sent email asking for advice. Please email us to follow-up if it is something to do with the DAC or the MacOS.
最後修改時間: 2015-11-09 01:40:21 - #1237 [nh1124], 15-11-08 22:17My DAC2 keeps crashing with my Mac mini once I upgraded to El Capitan. Now I have to keep the DAC2 permanently disconnected from the Mac. It's very frustrating. Any firmware update can fix this please?
最後修改時間: 2015-11-08 22:22:36 - #1236 [odysseyhk], 15-07-26 16:33Picture of Remedy Reclocker.
- #1235 [odysseyhk], 15-07-26 16:30We have connected Apple TV -> Toslink -> W4S Remedy Reclocker -> Coaxial -> DAC2.
I use my iPad to play Apple Music and download uncompressed music. Very good indeed.
Remedy resample everything to 24/96 with lower jitter. - #1234 [batmanamesIA], 15-07-25 13:57http://www.odysseyaudiohk.com/eng/remedy.html w4s remedy reclocker only 3xxx dollars
- #1233 [odysseyhk], 15-03-29 20:28Back of MS2.
- #1232 [odysseyhk], 15-03-29 20:27MS2 - Black.
- #1231 [odysseyhk], 15-03-29 20:26開箱 W4S MS2 - Full SSD/Dual Femto Clock/DSD I2S Streaming
終於收到個箱
This is ideal music server to me with:
> 2T SSD
> Fanless Music Server
> New digital output circuit which support direct DSD streaming over I2S
> Dual Femto Clock, ultra low jitter digital output - #1230 [odysseyhk], 15-02-22 16:24After one week of non-stop run-in, the STP-SE with Stage 2 upgrade is now ready for audition. It is very beautiful sound, very natural and with the micro-dynamics which touch my heart. Spend the whole afternoon yesterday. So glad it arrives before CNY.
Another new toy coming soon is the new W4S Music Server.
1/ Full SSD (2TB)
2/ Support native DSD over I2S/HDMI
3/ Using 2 Femto Clocks for digital out (coaxial and I2S HDMI) - #1229 [odysseyhk], 15-02-19 11:57The new Wyred4Sound STP-SE Preamp Stage 2 Upgrade arrived (black unit). It is undergoing 24x7 run-in and replacing the STP-SE which we have been using for 2 years (silver unit). The original STP-SE will be used for loan-out home audition. STP-SE is driving a 2 ST-1000 in a bi-amp configuration driving a pair of excellent 3 ways speakers.
Stage 1 Upgrade Adds...
Rhodium plated Furutech Fuse
4 Schottkey diodes
4 premium inductors
W4S discrete regulators
24 Vishay Z-Foil resistors
Stage 2 Upgrade Adds...
All upgrades in Stage 1
Furutech rhodium plated IEC inlet
48 Vishay Z-Foil resistors located in the resistor ladder volume control
16 upgraded high frequency filter capacitors
Green OLED display - #1228 [odysseyhk], 15-01-28 21:04Hi lincoln,
"想玩DlY USB線,請問DAC2要用PC的5V电源嗎?可否飛佐电源只用data的正負两个接点?Tkx"
It depends on whether you are using DAC2 or DAC2 DSD
DAC2:
Ground should always be required. 5V is not required. 2 signal wires of course required.
DAC2 DSD:
All 4 wires are required. The reason is that DAC2 DSD is designed with galvanic isolation. USB is electrically isolated from the DAC circuit. What that means is that the USB circuit of DAC2 must be powered by the PC as it cannot be connected to the DAC circuit. So 5V power is required to be supplied by PC side.
Hope it helps.
最後修改時間: 2015-01-28 21:05:18 - #1227 [lincoln], 15-01-28 15:38Barry,
想玩DlY USB線,請問DAC2要用PC的5V电源嗎?可否飛佐电源只用data的正負两个接点?Tkx - 下一頁 (2 of 63)
- 返回 ...
1/ Turn off the DAC2 with the power button on the front plate.
2/ There are 3 buttons on DAC2, hold the upper two buttons, then push the power button, it will be under set-up mode.
3/ use the upper 2 buttons to scroll the menu till you see "coaxial", click the lower button to select. Then you can select fixed or variable output.
Hope it helps.